Equipment Name: Air Tightness Test Bench TSK800
Classification of Test Objects:
1、Connectors
2、High-voltage Wiring Harnesses
3、High-voltage Connectors
4、AC/DC Charging Guns
5、Mode 2 Control Boxes
| Product Model | TSK800A | 0~200KPA |
| TSK800B | 0~1MPA | |
| TSK800C | Positive and Negative Pressure-100KPA | |
| Sensor Accuracy | 0.2%FS | |
| Test Pressure Range | 0-150Kpa▲1 | |
| Maximum Resolution | Better than 1 Pa | |
| Pressure Regulation Mode | Standard-equipped Mechanical Type | |
| Pressure Type | Positive Pressure | |
| Pressure Regulation Range | Same as Test Pressure Range | |
| Regulation Accuracy | 0.2%FS | |
| Pressure Unit | 8 types | |
| Flow Unit | 3types | |
| Environmental Drift Correction | Available | |
| Maximum Number of Program Combinations | 100Groups | |
| Historical Data Storage | * | |
| USB Interface | 1unit | |
| RS232/485 Interface | RS232+RS485 | |
| Modbus Protocol | * | |
| TCP/IP Protocol | * | |
| External Control Output Type | 1-channel Relay | |
| Number of External Control Input Points | 1-channel NPN Input | |
| Maximum Set Time | 3000Seconds | |
| Basic Test Method | Direct Test | Relative Pressure Difference Method; Leakage Amount ΔP |
| Indirect Test | Suitable for Leakage Testing of Products Without Inflation Port | |
| Flow Rate Judgment | Determine Product Leakage by Means of Leakage Rate | |
| Volume Judgment | Judge Whether the Product Leaks by Calculating the Volume Change of the Tested Object | |
| Reverse Judgment | Designed for Testing Scenarios Where Test Air Pressure is Close to Source Pressure | |
| Micro Leakage Test | High-precision Detection for Micro-products (e.g., Medical Capsules) | |
| Blockage Test | Applicable to Occasions Such as Pipeline Blockage, Assembly Deformation, Check Valve Reverse Flow, etc. | |
| Burst Test | Record the Instantaneous Pressure Peak During Inflation Process | |